Daily Maintenance

  • Blow guns and check for sintering
  • Check the setting of the powder spray gun
  • Keep gun feed air low
  • Check the injectors (signs of caking or milling at collecting nozzle)
  • Blow injectors and hoses
  • Blow suction pipe and check out for leaks
  • Clean facility, recovery and surrounding area
  • Check suction resistance of recovery
  • Check fluidization
  • Check function of the level probe
  • Check function of the flowmeter
  • Check the setting of the air pistol
  • Check high-voltage and current display
  • Check and empty waste containers at the final filter
  • Check seal of filter/cyclone/piping


If you need more information please feel free to contact us