CAUSE: Inadequate sieve machine
CORRECTION: If a smaller mesh size is not sufficient, a sieve machine with ultrasound must be considered
CAUSE: If the conveyor is not cleaned regularly or inappropriate lubricants are used
CORRECTION: Clean regularly, attach a cover if necessary
CAUSE: If powder is blown-off in the curing oven
CORRECTION: Check the air currents in the building
CAUSE: Powder residue in the oven
CORRECTION: This can be prevented by regular cleaning
CAUSE: Poorly clean recovery
CORRECTION: Regular cleaning
CAUSE: Dirty air is sucked into the booth
CORRECTION: Here, the coating plant may need to be separated from production areas
CAUSE: If several booths are operated together, cleaning may cause an impairment may occur
CORRECTION: In this case, the booths must be separated from each other